KAYDEN Remote Control & Monitoring Software, Portable USB Flash Drive - Communication cable not included

by Kayden


  • Kayden RCM Software:
    • Full Software Suite for all Series.
    • For Microsoft .NET Framework 4.0+ on Windows 7 & onward.
    • Download the latest version of the Kayden RCM software from this website for free.  You can also purchase copies of the software on a Telematic USB Drive.
  • Features:
    • Kayden's Remote Configuration & Monitoring Software is available for the CLASSIC Series switches.
    • Allows operators and control system engineers to quickly change settings or just ensure operation from a local or distant location.
    • All Kayden switches have RS-485 Modbus support.
  • Installation Instructions:
    • Click on the Download link:    Download
    • Save the file to disk.
    • Unzip the file.
    • Double click and run the .exe installation file included with the software.
  • License Agreement:

Copyright Kayden 
All Rights Reserved.
NOTE: By installing the Kayden software you indicate your acceptance of the terms and conditions of this license as outlined below.

This license grants you the right to install and run one or multiple instances of this software for use with Kayden products for remote control & monitoring purposes.

This software is under exclusive copyright of Kayden Instruments and may not be altered, repackaged, redistributed, sublicensed or re-sold, in any way.

Any attempt to copy, modify, or reverse engineer any part of this software will automatically terminate all rights under this license.

If any terms are violated, Kayden reserves the right to revoke this license at any time.

This software is provided "AS IS" without warranty of any kind. In no event will Kayden be liable for any damages of any kind arising out of the use or inability to use this software.

Kayden reserves the right to modify these terms at any time without prior notice.
The above description encapsulates the entire product series. Specifications for individual configurations may vary depending on the selection chosen.
Kayden assembles most products on receipt of order.

4 Models In Stock



  • Media Type
    USB Drive


  • Serial Communication Adaptor: RS232 to RS485
  • RS-232 side:
    • Connector: DB-9 female
    • Signals:
      • Passes through pins 3 (TD) and 2 (RD)
      • Pins 7 (RTS) and 8 (CTS) are tied together
      • Pins 4 (DTR), 6 (DSR) and 1 (CD) are tied together
  • RS-485 side:
    • Connector: 4-pin terminal block
    • Signals:
      • Half-duplex two-Wire operation only
      • Automatic control circuit enables driver only when transmitting
      • Receiver is disabled when transmitting to prevent echo back to RS-232 device
      • Can transmit up to 4000 feet at 19200 baud.
  • Power Requirements: at least two RS-232 handshake lines, derives power from hosts serial port


  • RS232: USB Adapter allows laptops or PCs with only USB ports to connect to SCA adapter


  • For Communicaion with Kayden RCMS Software
  • Driver should automatically download once plugged into a computer or manually download at https://ftdichip.com/drivers/

Selected Configuration


In Stock Request a Quote


reset configuration

System Requirements

  • Kayden Communication accessories are required for full functionality of Kayden RCM software
  • Microsoft .NET Framework 4.0 onward, plus Windows XP, Vista & 7 onward
  • Serial or USB communications (COM) port


Kayden RS232/RS485 Serial Communication Adapter


Kayden RS232/USB Adapter


Kayden RS485/USB Adapter