CMPtm 112

Insertion Style Threaded

Specifications

Applications

• Flow Switch for Liquids

Area Classifications

• General purpose

Material of Construction - Sensor

• 316L Stainless Steel,all-welded

Process Connections - Threaded

• 3/4" MNPT (Male National Pipe Tapers)

Insertion 'U' Lengths

• Imperial:
  Available insertion lengths include 1.2", 2", 3" and 4"
• Metric:
  Available insertion lengths include 3cm, 5cm, 7.6cm and 10.1cm

Sensor Operating Temperature Range - Continuous Use

• -40º C to +85º C (-40º F to +185º F)

Operating Pressure - Sensor

• Hydrostatically proof pressure tested to 525 psig (3.6 Mpa) at 21º C (70º F)
• Higher ratings available

Electronics Operating Temperature Range - Continuous Use

• -40º C to +85º C (-40º F to +185º F)

Input Power

• 12-36 VDC
• LED on indicates power on

Electronics - Standard Features

• Simple control, relay energy status indicated by LED, relay can be NC (normally closed) or NO (normally open) user selectable

Outputs

• Single SPST sealed relay rated @ 0.5 amp resistive 36 volts AC/DC

CMP Control Circuit Features

• Input Power:
  12-36 VDC
  LED on indicates power on
• Power Consumption:
  3.9 watts maximum @ 24 VDC
• Heater Power:
  1.33 watts maximum
• Relay Rating:
  Single SPST sealed relay rated @ 0.5 amp resistive 36 volts AC/DC

Flow Switch Service

• Water-based Liquids:
  0.01 to 3.0 ft./sec(0.003 to 0.91 meters/sec.)
• Other Fluids:
  Contact Kayden
• Lower Flow Rates:
  The CMP is available for low flow rate applications down to 0.04 cc/second in water with installation in a 3/4 inch tee with orifice

Level Switch Service

• Accuracy:
  ±0.25 inch (±0.64 cm)

Response Rates

• 0.5 to 30 seconds. Actual response time depends on the fluid, direction of change and service application.

Sensor Enclosure (None)

• No external enclosure. The electronics are epoxy encapsulated within the sensor housing.

Cable Type

• Standard(longer lengths available)
• 10 foot (3 m)
• 4-wire
• 24 gauge with shield
• Polyurethane jacket