CLASSICtm 832

In-Line Style Flanged

Specifications

Applications

• Flow and level

Material of Construction - Sensor

• 316L Stainless Steel c/w Nickel Braze

Process Connections - Flanged

• Raised Face and RTJ (Ring-Type Joint)
• Flange size and weight range from 3/4" 150# to 10" 2500#

Flange Material

• Available in 316L Stainless Steel, Carbon Steel, Monel 400, Nickel, Alloy 20, Inconel, Hastelloy B, Hastelloy C-276 and Titanium Grade 2

Sensor Assembly Body Lengths (Flange Face to Flange Face)

• Imperial:
  Custom lengths are available from 7" to 72"
  Note:7" body length not available for all flange sizes.Contact kayden for information
• Metric:
  Custom lengths are available from 18cm to 182cm

Sensor Operating Temperature Range - Continuous Use

• -55° C to +200° C (-67° F to +392° F)

Operating Pressure - Sensor

• Maximum working pressure to flange rating
• MWP derated with temperature

Electronics Operating Temperature Range - Continuous Use

• -55° C to +75° C (-67° F to +167° F).
  For temperatures above 75° C (+167° F) remote mounting of electronics enclosure is required.

Input Power

• 12-24 VDC; 115-230 VAC, 50-60 Hz
• Universal Power Input
• Power Consumption:
  Maximum 4.8 watts

Electronics - Standard Features

• 100% digital design. All electronics are environmentally sealed
• 4-20 mA output scaled to flow range
• Intelligent user interface with push-button setup and constant display of operation
• Temperature compensation
• Automated redundant self-test diagnostics
• MODBUS support via RS-485 communications*
• Easy setup: no mechanical jumper or trim pots
• Incrementally adjustable heater power (5% steps) with automatic over-range protection
• Dual independent relays
• Temperature Mode*: Process temperature may be displayed/graphed in Flow/Level mode
• 4 adjustable independent switch point timers
• Front panel lock-out*
• Bypass (Power On Delay) timer

Outputs

• MODBUS registers via RS-485
• 4-20 mA current loop (thermal signal, scaleable)
• Dual SPDT sealed relay contacts rated @ 5 amps resistive 230 VAC or 24 VDC max

Communications

• RS-485 using Kayden's Remote Control & Monitoring Software (RCMS) or other MODBUS compatible software

CLASSIC 800 Control Circuit Features

• Output Signal:
  MODBUS registers via RS-485
  4-20 mA current loop (thermal signal, scaleable)

Swith Point Range

• Water-based Liquids:
  0.015 to 50 cc/sec (0.015 to 50 ml/sec)
• Hydrocarbon-based Liquids:
  0.033 to 110 cc/sec (0.033 to 110 ml/sec)
• Gases:
  0.6 to 20,000 cc/sec (0.6 to 20,000 ml/sec)
  Standard condition: 21° C (70° F) 1 Atms
• Other Fluids:
  Contact Kayden

Accuracy

• Flow Service:
  ±0.02% of set point over operating range of ±50°F(±28°c)
• Level Service:
  ±0.25inches(±0.64cm)
• Repeatability:
  ±0.5% of reading
  1% of full signal range at constant process conditions

Response Rates

• Approximately 0.5 to 30 seconds.

Agency Approvals

• FM - Flameproof
  - Class I, Division 1, Groups B, C & D
  - Temperature codes: T2D (Ta=75ºC), T3 (Ta=65ºC)
  - Class I, Zone 1, AEx d IIB + H2
  - Type 4/IP55
• Blind cover standard
• Lens cover optional
• Enclosure epoxy coated with 0-ring on 5pin cover

• FM - Flameproof
  - Class I, Division 1, Groups B, C & D
  - Temperature codes: T2D (Ta=75ºC), T3 (Ta=65ºC)
  - Class I, Zone 1, AEx d IIB + H2
  - Type 4/IP55
• Blind cover standard
• Lens cover optional
• Enclosure epoxy coated with O-ring on 5pin cover
• One electronics module per enclosure

Kayden RCMStm - Optional (Remote Control & Monitoring Software)

• Operated via a personal computer locally or from a remote control center
• Monitor operating status
• Adjust set points 1 & 2
• Adjust relay modes
• Modify heater settings to optimize response time
• Lock or unlock the front panel to protect the settings
• Load or save user settings
• Visualize the actions of the process via the graphical display
• Many other adjustable features