BASIC+tm 432

In-Line Style Flanged

Specifications

Applications

• Flow and Level

Material of Construction - Sensor

• 316L Stainless Steel c/w Nickel Braze

Process Connections - Flanged

• Raised Face and RTJ (Ring-Type Joint)
• Flange size and weight range from 3/4" 150# to 10" 2500#

Flange Material

• Available in 316L Stainless Steel, Carbon Steel, Monel 400, Nickel, Alloy 20, Inconel, Hastelloy B, Hastelloy C-276 and Titanium Grade 2

Sensor Assembly Body Lengths (Flange Face to Flange Face)

• Imperial:
  Custom lengths are available from 7" to 72"
  NOTE:7" body length italics not available for all flange sizes.Contact kayden for information.
• Metric:
  Custom lengths are available from 18cm to 182cm

Sensor Operating Temperature Range - Continuous Use

• -55° C to +200° C (-67° F to +392° F)

Operating Pressure - Sensor

• Maximum working pressure to flange rating
• MWP derated with temperature

Electronics Operating Temperature Range - Continuous Use

• -55° C to +75° C (-67° F to +167° F).
  For temperatures above 75° C (+167° F) remote mounting of electronics enclosure is required.

Input Power

• 12-24 VDC; 115-230 VAC, 50-60 Hz
• Universal Power Input
• Power Consumption:
  Maximum 6 watts

Electronics - Standard Features

• Microprocessor based electronics, environmentally sealed
• Intelligent user interface, constant display of operation (Flow/Level)
• Temperature compensation
• Automated redundant self-test diagnostics
• MODBUS support via RS-485 communications*
• Variable heater power

Outputs

• MODBUS registers via RS-485
• Single SPST sealed relay contact rated @ 5 amps resistive 230 VAC or 24 VDC

Communications

• RS-485 using MODBUS compatible software

Switch Point Range

• Water-based Liquids:
  0.015 to 32cc/sec.(0.015 to 32 ml/sec)
• Hydrocarbon-based Liquids:
  0.033 to 71cc/sec.(0.003 to 71 ml/sec.)
• Gases:
  0.6 to 13,000cc/sec(0.6 to 13 l/sec)
• Other Fluids:
  Contact Kayden

Accuracy

• Flow Service:
  ±0.2% of set point over operating range of ±50° F(±28°C)
• Level Service:
  ±0.25 inches(±0.64cm)
• Repeatability:
  ±0.5% of reading
  1% of full signal range at constant process conditions

Response Rates

• Approximately 0.5 to 30 seconds.

Agency Approvals

• FM - Flameproof
  - Class I, Division 1, Groups C & D
  - Temperature codes: T2D (Ta=75ºC), T3 (Ta=65ºC)
  - Class I, Zone 1, AEx d IIB
  - Type 4/IP55
• Blind cover standard
• Lens cover optional
• Enclosure epoxy coated with O-ring on 8-pin cover
• Security locking screw for cover

• FM - Flameproof
  - Class I, Division 1, Groups C & D
  - Temperature codes: T2D (Ta=75ºC), T3 (Ta=65ºC)
  - Class I, Zone 1, AEx d IIB
  - Type 4/IP55
• Blind cover standard
• Lens cover optional
• One electronics module per enclosure
• Enclosure epoxy coated with O-ring on 8-pin cover