BASIC+tm 430

In-Line Style Threaded

Specifications

Applications

• Flow and Level

Material of Construction - Sensor

• 316L Stainless Steel c/w Nickel Braze

Process Connections - Threaded

• 3/4" FNPT (Female National Pipe Thread)

Sensor Assembly Body Length

• In-Line body length is 3.5"(8.8cm)

Sensor Operating Temperature Range - Continuous Use

• -55° C to +200° C (-67° F to +392° F)

Operating Pressure - Sensor

• Maximum working pressure to 3500 psig (24 Mpa) at 21° C (70° F)
• MWP derated with temperature
• Higher ratings available

Electronics Operating Temperature Range - Continuous Use

• -55° C to +75° C (-67° F to +167° F).
  For temperatures above 75° C (+167° F) remote mounting of electronics enclosure is required.

Input Power

• 12-24 VDC; 115-230 VAC, 50-60 Hz
• Universal Power Input
• Power Consumption:
  Maximum 6 watts

Electronics - Standard Features

• Microprocessor based electronics, environmentally sealed
• Intelligent user interface, constant display of operation (Flow/Level)
• Temperature compensation
• Automated redundant self-test diagnostics
• MODBUS support via RS-485 communications*
• Variable heater power

Outputs

• MODBUS registers via RS-485
• Single SPST sealed relay contact rated @ 5 amps resistive 230 VAC or 24 VDC

Communications

• RS-485 using MODBUS compatible software

Switch Point Range

• Water-based Liquids:
  0.015 to 32cc/sec. (0.015 to 32ml/sec.)
• Hydrocarbon-based Liquids:
  0.033 to 71cc/sec (0.033 to 71ml/sec)
• Gases:
  0.6 to 13,000cc/sec (0.6 to 13 l/sec)
• Other Fluids:
  Contact Kayden

Accuracy

• Flow Service:
  ±0.2% of Set point over operating range of ±50°F(±28°C)
• Level Service:
  ±0.25 inches(±0.64cm)
• Repeatability:
  ±0.5% of reading
  1% of full signal range at constant process conditions

Response Rates

• Approximately 0.5 to 30 seconds.

Agency Approvals

• FM - Flameproof
  - Class I, Division 1, Groups C & D
  - Temperature codes: T2D (Ta=75ºC), T3 (Ta=65ºC)
  - Class I, Zone 1, AEx d IIB
  - Type 4/IP55
• Blind cover standard
• Lens cover optional
• Enclosure epoxy coated with O-ring on 8-pin cover
• Security locking screw for cover

• FM - Flameproof
  - Class I, Division 1, Groups C & D
  - Temperature codes: T2D (Ta=75ºC), T3 (Ta=65ºC)
  - Class I, Zone 1, AEx d IIB
  - Type 4/IP55
• Blind cover standard
• Lens cover optional
• One electronics module per enclosure
• Enclosure epoxy coated with O-ring on 8-pin cover